Decorated Framed Diagonal Screening

What you need:

As many framed diagonal lattice sheets as you like to cover the space you want
Level
Drill
Small bottles or jars
Copper wire
Flowers or clippings

Instructions:

Step 1

Decide where you want to install your privacy screen. It’s best to install on a solid surface like a fence. If you don’t have a fence to attach to, you can set two 4×4 posts into the ground. (For permanence and rock solid construction, set the posts in a concrete base per the depth required by the building code for your geographical area.) Connect the two posts with two horizontal 2×4’s using steel hangers.

Step 2

Drive one screw into the top horizontal rail to secure your first panel.

Step 3

Check the lattice panel to make sure it is plumb.

Step 4

Drive a second screw into the other side of the panel. Repeat with two more screws attaching the panel to the lower horizontal 2×4 of your fence.

Step 5

Hang your other panels using the same technique.

Step 6

Wrap copper wire around the neck of your bottle or vase. Leave a couple inches of wire after twisting the ends. Hold the bottle up to the lattice screen and pull the wires through to the back of the screen.